Reference
Specifications and technical data
Every published figure for the kitchen tap bodies and the under-counter machines, taken from our own drawings and verified twice. If a number is not on this page it is because we do not yet have it in writing from the factory, and we would rather leave a gap than fill it.
Kitchen tap bodies
Dimensions, model by model
| Model | Overall height | Clear spout height | Reach | Configuration |
|---|---|---|---|---|
| 14001 | 397.3 mm | 230.4 mm | 200 mm | Boiling, chilled and normal hot & cold |
| 24012 | 415.9 mm | 252.1 mm | 200 mm | Electronic control, tallest spout in the range |
| 13001 | 360.3 mm | 225.4 mm | 186 mm | Boiling with normal hot & cold |
| 12001 | 248.6 mm | 155.6 mm | 139 mm | Dedicated boiling tap, compact body |
Tap hole diameter is issued per model on the installation drawing, not published here. No drawing in the range states it as a published figure, and it must not be inferred from the visible base diameter. Ask for the drawing for the model you are specifying before the worktop is cut.
Clear spout height is measured from the worktop to the underside of the outlet. All dimensions in millimetres.
Water and power
Operating data
- Boiling delivery temperature
- 98 °C
- Mains inlet pressure
- 1.5 – 5 bar
- Boiling element
- 1500 W
- Boiling tank capacity
- 2.4 L
- Chilled machine draw
- 120 – 170 W
- Refrigerant
- R600a
- Filter service interval
- 3 – 6 months, or 2000 L
Build
Components and cover
- Boiling control
- Child-safe self-returning cartridge
- Mixer control
- Precision ceramic cartridge
- Outlet
- Neoperl aerator
- Tap warranty
- 3 years
- Machine warranty
- 2 years
Both under-counter machines require their own dedicated electrical supply within the kitchen cabinet. Inlet pressure outside the stated band needs a pressure-reducing valve on the schedule.
Under-counter
The three units below the worktop
-
Boiling machine
188.2 × 188.2 × 260.7 mm
2 × G 3/8" outlets, top-mounted
-
Chilled machine
440 × 188 × 306.2 mm
R600a refrigerant, side service ports
-
Anti-scale filter
105 × Ø66.5 × 295.4 mm
230 mm bowl clearance to change
Dimensions are width × depth × height. The filter figure is the head and bowl together; the bowl needs a further 230 mm of clear space below it to be taken off for a cartridge change. Because the three units will not sit in one standard sink base, the cabinet arithmetic is set out in full on its own page.
Cabinet space arithmeticApprovals
Stated per mark, and per model
Approval on this range is model-specific. A buyer can check a public directory in a minute, so we set out what each mark covers and publish a model against it only once that is confirmed in writing, rather than putting a single badge on the whole kitchen range.
WRAS
UK water fittings approval. Being confirmed in writing model by model, including the certificate holder.
CE / CB
Electrical safety for the under-counter machines. Being confirmed in writing model by model.
WaterMark
Australian plumbing certification. Being confirmed in writing model by model; the Australian brass specification is quoted separately.
Current status — being confirmed in writing
The position for each model, and the company each certificate is registered to, is being confirmed in writing. Until it is, we publish no model list and no certificate number; email us and we send you the current status for your market. Where an Australian specification is required the brass differs and is quoted separately.
Certification detailAsk for the specification pack
Drawings, technical sheets and the current model-by-model approval position. Commercial terms are confirmed in writing per model and per order.